|
Laser Cut for the Discriminating Modeler |
Hornet X-3D ARFHornet X-3D ARF Micro electric RC helicopter is ideal for intermediate and advanced pilots. This model is on top of the Hornet X line and is completely compatible with these models. Hornet X-3D is able to fly all 3D figures without any limitations. |
Hornet X-3D ARF features:
Rotor Diameter: 560 mm
Fuselage Length: 510 mm
Flight Weight: 340 g
Flight time: 6 - 12 min
Motor: Twister EM 300/20
Power Cells: 3 x LiPol 750 - 1200 mAh
Flight Weight: 340g (12 oz)
Build Manual is HERE
$153.00
|
Hornet X-3D ARF
is the highest type of the Hornet X
line. This model substitutes his predecessor
Hornet 2. New on this model are minimum glued
joints, much easier assembly. This kit also
contains tail blade grips with bearings, Bell
Hiller mixer rotor head, the central hinge in
the swash plate, freewheel and special rotor
blades with higher stability. All these new
elements together with the brushless motor
Twister EM 300/20 and the speed controller with
the capability of adjusting of the constant rpm
MS-116 offers almost unlimited possibilities of
3D flying. The model contains 20 ball bearings.
It is necessary to use at least a 6-channel
transmitter with the program accessory which can
control CCPM in the HELI mode HR3.
|
